Big libraries and long transfers
A full save or a full send moves your whole library over your own network: every stem, every video. On a big library that is hours, not minutes, and most of what can go wrong has nothing to do with setshed. This page is what to expect and how to set yourself up so it just works.
How long will it take?
It depends on the size of the library and the link between the computer and the unit.
| Link | Sustained speed | 20 GB library | 70 GB library |
|---|---|---|---|
| Wi-Fi (typical) | 2.5 to 6 MB/s | 1 to 2 hours | 3 to 8 hours |
| Direct cable | 8 to 16 MB/s | 20 to 40 minutes | 1 to 2.5 hours |
Before a full save or send starts, setshed tells you the size and an estimate. After the first transfer with a unit it knows the real sustained speed of your setup and the estimate uses that instead of the typical figures.
The first save of a unit is the big one. After that, Check & save and Send move only what changed, which is usually seconds.
Before you start
- Plug the computer in and leave the lid open. The agent holds the computer awake while a transfer runs, but a laptop on battery can still shut down.
- Room on this computer. A full save makes a copy of the whole library here before it goes to the cloud, so you need at least the library's size free, plus a little. A full send downloads the library here first, the same way. setshed checks this before it starts and tells you how much to free if it is short.
- Same network, close to the router. The unit and the computer must share a network. A cable from the computer to the unit is faster still, if you have one.
- Room on the unit and in the cloud. A send that cannot fit on the unit, or a save that cannot fit on your plan, is refused before it starts, with the numbers.
- Nothing else talking to the unit. B.Beat Manager and the unit's own apps take the connection; close them first.
You can keep using setshed while it runs. The progress card shows what is moving and a clock; if nothing has moved for a while it says so.
If it stops
Every failure says whose side it is on: this computer, the unit, the network, the cloud, or setshed itself. Read that line first.
- This computer: almost always disk space. Free up what the message asks for and try again. The videos already read are kept, so the retry does not start from zero.
- The unit: it needs to be on its home screen, not playing, with nothing else connected.
- The network: a dropped link. Just try again; downloads and uploads resume from where they stopped.
- The cloud: usually room on your plan. The message says how much the library needs.
- setshed: that one is on us. A report is sent automatically; tell us in Discord and we will look at it.
Nothing on the unit is touched by a save, ever. A full send only writes to the unit after the whole library has downloaded and the checks have passed.